For our safety cover models Novatrend, Multiversal and SwissTop, we also offer different wind protections to additional tighten to your cover.

Wind safety strap
The wind safety strap is used with the hemstitch models. It is pulled through the longitudinal hemstitch. This creates an additional tensioning, which pulls the sides of the cover in the direction of the edge panels. The wind can thus not easily get under the cover.

Stainless steel eyelets
The stainless steel eyelets can be used on both the classic model and the K model. However, a combination with a wind safety strap is not possible. The eyelets are placed at a distance of approx. 1 m, but can also be positioned individually to suit the pool perimeter. The tensioning is done by means of rubber tensioners and ground anchors.

BAC Clips
The BAC clips are suitable exclusively for keder models. They can be positioned freely along the long sides. This allows the cover to be easily adapted to existing attachment points. Here, too, the bracing is done by means of rubber tensioners and ground anchors.