deck mounted slatted cover
ACOE
Robust and universally applicable above-floor roll-up device for fixed installation on the pool edge. The fully automatic rolling up and down of the roller shutter is motor-driven. Convenient and simple - also with radio remote control on request!
The rewinder consists of two side shields made of powder-coated stainless steel and an aluminum or stainless steel winding shaft. The drive is protected under a stainless steel motor cover. In the basic version, operation is via a key switch in the motor cover.
If your pool is limited by a wall on the side, installation with a wall bearing on one side is possible. Operation also optionally possible by means of radio remote control.
- The opening and closing of the basin must always take place with a view of the basin
- When installed outdoors, the system must be protected from overheating by a cover or a sunshield
Your way to a premium pool cover
With our competent partners in your area you will find the right solution quickly and easily.
